Marble and granite waste as mineral addition in mortars with different water-cement ratios
Keywords:
resíduo de mármore e granito, aproveitamento de resíduo, compósitos cimentíciosAbstract
Civil construction is associated with several environmental impacts, such as CO2 emissions during cement production and waste generation. In this context, aiming to contribute to the sustainable development of the sector, this article aims to study the effect of replacing cement by marble and granite waste (MGW) in different water/cement ratios (w/c). To do this, the waste was characterized and applied in 1:3 mortars, replacing the cement at 20% content. Mortars with and without plasticizing additives were produced, measuring the amount of water by fixing the workability and the additive content. Water demand, compressive strength, dynamic modulus of elasticity, water absorption by immersion and capillarity, electrical resistivity and accelerated carbonation were evaluated. The results showed that the MGW acted as a filler, promoting refinement of the porous structure and maintenance of compressive strength due to better particle packing. It was observed that MGW made the mortar structure more homogeneous. However, the filler effect of the waste (inert) did not compensate for the reduction in the cement content of the mortars for strength to carbonation. In general, it was observed that waste is more efficient in lower water/cement ratios.
Downloads
Downloads
Published
How to Cite
Issue
Section
License
Copyright (c) 2022 Ambiente Construído

This work is licensed under a Creative Commons Attribution 4.0 International License.
Copyright
Authors of articles published in Ambiente Construído retain the copyright of their works, licensing them under the Creative Commons Attribution BY 4.0 license, which allows articles to be reused and distributed without restriction, provided that the original work is properly cited.


