Valuation of waste from a geopolymeric composite precast industry as a pozzolanic addition

Abstract

The objective of this study is to characterize the industrial solid waste generated by a geopolymeric composites precast industry in Goiás and use them in the production of mortar, in partial replacement of cement in the contents of 5%, 10%, 15% and 25%, due to its probable pozzolanic effect. For the research the residue underwent crushing in a hammer mill and sieving in a #40 mesh conducted in the industry itself. Then, physical-chemical analyzes were conducted to verify if the residue meets the parameters established by NBR 12653 (ABNT, 2014) Pozzolanic Materials – Requirements. The residue showed potential to be used as pozzolana, as in the particle size analysis only 19% was retained on sieve #325 and the moisture content also met the parameters of the aforementioned standard. However, the fire loss content and the alkali content available in  were higher than the standard requirements, because the residue contains tire shavings and sodium hydroxide (NaOH) in its composition. In relation to the performance index with Portland cement at 28 days, the mortar with 5% residue in its composition met the standard conditions, but the performance with lime did not obtain the desired result, as the resistance decreased. After analysis, it has been realized that the residue does not qualify as pozzolan but can be used as a filler.