Analytical study of the curve of static bending test for wood specimens

Autores

  • Tiago Hendrigo de Almeida Department of Science and Materials Engineering, University of São Paulo (EESC/USP), São Carlos, São Paulo, Brazil.
  • Diego Henrique de Almeida Department of Civil Engineering, Federal University of Rondônia (UNIR), Porto Velho, Rondônia, Brazil.
  • Fabiana Yukiko Moritani Department of Structural Engineering, University of São Paulo (EESC/USP), São Carlos, Sao Paulo, Brazil.
  • Marcos Cesar de Moraes Pereira Department of Science and Materials Engineering, University of São Paulo (EESC/USP), São Carlos, São Paulo, Brazil.
  • André Luis Christoforo Department of Civil Engineering, Federal University of São Carlos (UFSCar), São Carlos, São Paulo, Brazil.
  • Francisco Antonio Rocco Lahr Department of Structural Engineering, University of São Paulo (EESC/USP), São Carlos, Sao Paulo, Brazil.

Palavras-chave:

Deflection, force, regression model, static bending test, testing of wood.

Resumo

The NBR 7190:1997 “Design of Timber Structures” provides the procedure for several mechanical tests, and among them, the Static bending test for Modulus of Elasticity (Em) and Conventional Value of Strength (fm) determinations. It is common to characterize wood batches with a small number of specimens, what makes it difficult to perform an estimative test for rupture determination, and afterwards, to carry out the loading cycle for Em estimation. In these cases, instead of Force parameters, Deflection parameters are used for the loading cycle. This paper aims to identify a pattern between Force and Deflection parameters by investigating the Force vs. Deflection curve of the static bending test of wood specimens. According to results, there is a well pronounced pattern between Force and Deflection parameters in the linear part of the Force vs. Deflection curve, and based on this, we proposed a linear regression model between logarithm values of the force percentage (in relation to the rupture) and the denominator of the span value (as a Deflection parameter), resulting R2 equal to 97.41%. This result makes the conduction of the static bending test easier in specialized laboratories for testing of wood.

Downloads

Não há dados estatísticos.

Downloads

Publicado

2019-12-10

Edição

v. 20 n. 1 (2020)

Seção

Artigos

Licença

Direito autoral (Copyright)

A Revista se reserva o direito de efetuar, nos originais, alterações de ordem normativa, ortográfica e gramatical, com vistas a manter o padrão culto da língua, respeitando porém, o estilo dos autores. As provas finais serão enviadas aos autores. Os trabalhos publicados passam a ser propriedade da revista Ambiente Construído. As opiniões emitidas pelos autores dos artigos são de sua exclusiva responsabilidade.

Creative Commons Attribution License

Artigos mais lidos pelo mesmo(s) autor(es)

<< < > >>