This is an outdated version published on 08-03-2026. Read the most recent version.

Determination of Pinaverium Bromide in pharmaceutical dosage forms by a validated Stability-Indicating LC Method

Authors

  • Maximiliano da Silva Sangoi Laboratory of Pharmaceutical Analysis; Faculty of Pharmacy; Federal University of Rio de Janeiro
    • Anna Karolina Mouzer da Silva Machado Laboratory of Pharmaceutical Analysis; Faculty of Pharmacy; Federal University of Rio de Janeiro
      • Lorena Coimbra Florindo Laboratory of Pharmaceutical Analysis; Faculty of Pharmacy; Federal University of Rio de Janeiro
        • Brenda Rocha Gonçalves Laboratory of Pharmaceutical Analysis; Faculty of Pharmacy; Federal University of Rio de Janeiro
          • Vítor Todeschini Laboratory of Pharmaceutical Analysis; Faculty of Pharmacy; Federal University of Rio de Janeiro

            DOI:

            https://doi.org/10.22456/2527-2616.73964

            Keywords:

            pinaverium bromide, experimental design, liquid chromatography, stability-indicating method, validation

            Abstract

            A reversed-phase liquid chromatography (LC) method is validated for the determination of pinaverium bromide (PB) in pharmaceutical dosage forms. The LC method is carried out on a reversed-phase monolithic C18 column (100 x 4.6 mm i.d.), maintained at 45 ºC. The mobile phase consisted of acetonitrile and a solution of triethylamine 0.3% pH 5.0 (50:50; v/v), run at a flow rate of 2.0 mL/min, with photodiode array detector set at 213 nm. The chromatographic separation is obtained with PB retention time of 3.4 min, and it is linear in the range of 5-100 μg/mL (r2 = 0.9991). The limits of detection and quantitation are 1.41 and 4.70 μg/mL, respectively. The specificity and stability-indicating capability of the method are proven through degradation studies, which also showed that there is no interference of the formulation excipients, showing that peak is free from any coeluting peak. The method showed adequate precision, with a relative standard deviation values lower than 1.38%. Excellent values of accuracy were also obtained, with a mean value of 100.68%. Experimental design is used during validation to calculate and prove method robustness. The proposed LC method is applied for the analysis of the PB pharmaceutical dosage forms, contributing to improve the quality control and to assure the therapeutic efficacy.

            Downloads

            Download data is not yet available.

            References

            Ikechi, R., Fischer, B.D., DeSipio, J., Phadtare, S. Irritable bowel syndrome: clinical manifestations, dietary influences, and management. Healthcare. 2017; 5(21): 1-14. DOI: https://doi.org/10.3390/healthcare5020021

            World Gastroenterology Organisation (WGO). Global Guidelines Irritable Bowel Syndrome: a Global Perspective. Milwaukee, USA, 2015. 28p.

            Weaver, K.R., Melkus, G.D., Henderson, W.A. Irritable bowel syndrome. Am J Nurs. 2017; 117(6): 48-55. DOI: https://doi.org/10.1097/01.NAJ.0000520253.57459.01

            Annaházi, A., Róka, R., Rosztóczy, A., Wittmann, T. Role of antispasmodics in the treatment of irritable bowel syndrome. World J Gastroenterol. 2014; 20(20): 6031-6043. DOI: https://doi.org/10.3748/wjg.v20.i20.6031

            Zheng, L., Lai, Y., Lu, W., Li, B., Fan, H., Yan, Z., et al. Pinaverium reduces symptoms of irritable bowel syndrome in a multicenter, randomized, controlled trial. Clin Gastroenterol H. 2015; 13: 1285-1292. DOI: https://doi.org/10.1016/j.cgh.2015.01.015

            Ramachandra, B. Development of impurity profiling methods using modern analytical techniques. Crit Rev Anal Chem. 2017; 47(1): 24-36. DOI: https://doi.org/10.1080/10408347.2016.1169913

            Kątny, M., Frankowski, M.. Impurities in drug products and active pharmaceutical ingredients. Crit Rev Anal Chem. 2017; 47(3): 187-193. DOI: https://doi.org/10.1080/10408347.2016.1242401

            Sahu, P.K., Ramisetti, N.R., Cecchi, T., Swain, S., Patro, C.S., Panda, J. An overview of experimental designs in HPLC method development and validation. J Pharm Biomed Anal. 2017; in press. DOI: https://doi.org/10.1016/j.jpba.2017.05.006

            Skibinski, R., Trawinski, J. Application of an untargeted chemometric strategy in the impurity profiling of pharmaceuticals: an example of amisulpride. J Chromatogr Sci. 2017; 55(3): 309-315. DOI: https://doi.org/10.1093/chromsci/bmw186

            Holm, R., Elder, D.P. Analytical advances in pharmaceutical impurity profiling. Eur J Pharm Sci. 2016; 87: 118-135. DOI: https://doi.org/10.1016/j.ejps.2015.12.007

            Jandera, P., Hájek, T., Sandra, P. Monolithic and core-shell columns in comprehensive twodimensional HPLC: a review. Anal Bioanal Chem. 2015; 407: 139-151. DOI: https://doi.org/10.1007/s00216-014-8147-3

            Sangoi, M.S., Todeschini, V., Steppe, M.. Monolithic LC method applied to fesoterodine fumarate low dose extended-release tablets: dissolution and release kinetics. J Pharm Anal. 2015; 5(2): 137-141. DOI: https://doi.org/10.1016/j.jpha.2014.10.001

            Ibrahim, F., Wahba, M.E.K. Simultaneous liquid chromatographic determination of ebastine with two sympathomimetic drugs using a monolithic column. J Chromatogr Sci. 2017; 55(3): 258-266. DOI: https://doi.org/10.1093/chromsci/bmw180

            Martins, D.F.C., Florindo, L.C., Machado, A.K.M.S., Todeschini, V., Sangoi, M.S. Bromide pinaverium: development and validation of spectrophotometric methods for assay and dissolution studies. J AOAC Int. 2017; in press. DOI: https://doi.org/10.5740/jaoacint.17-0013

            International Conference on Harmonization (ICH) of Technical Requirements for the Registration of Pharmaceutical for Human Use. Validation of Analytical Procedures: Text and Methodology Q2(R1). Geneva, Switzerland, 2005. 17p.

            Food and Drug Administration (FDA), Center for Drug Evaluation and Research. Guidance for Industry: Analytical Procedures and Methods Validation for Drugs and Biologics. Silver Spring, USA, 2015. 18p.

            Singh, S., Junwal, M., Modhe, G., Tiwari, H., Kurmi, M., Parashar, N., et al. Forced degradation studies to assess the stability of drugs and products. Trac-Trend Anal Chem. 2013; 49: 71-88. DOI: https://doi.org/10.1016/j.trac.2013.05.006

            Blessy, M., Patel, R.D., Prajapati, P.N., Agrawal, Y.K. Development of forced degradation and stability indicating studies of drugs - a review. J Pharm Analysis. 2014; 4(3): 159-165. DOI: https://doi.org/10.1016/j.jpha.2013.09.003

            Lenth, R.V. Quick and easy analysis of unreplicated factorials. Technometrics. 1989; 31: 469-473. DOI: https://doi.org/10.1080/00401706.1989.10488595

            Downloads

            Published

            28-08-2017 — Updated on 08-03-2026

            Versions

            How to Cite

            Sangoi, M. da S., Machado, A. K. M. da S., Florindo, L. C., Gonçalves, B. R., & Todeschini, V. (2026). Determination of Pinaverium Bromide in pharmaceutical dosage forms by a validated Stability-Indicating LC Method. Drug Analytical Research, 1(1), 38–43. https://doi.org/10.22456/2527-2616.73964 (Original work published August 28, 2017)

            Issue

            Section

            ORIGINAL ARTICLES

            Most read articles by the same author(s)

            Similar Articles

            1 2 3 4 5 6 7 8 9 10 > >> 

            You may also start an advanced similarity search for this article.