Aplicação do método Single Minute Exchange of Die em uma linha de envase de uma indústria de bioinsumos
DOI:
https://doi.org/10.22456/1983-8026.152689Keywords:
SMED, bottling line, bioinputs, setup reductionAbstract
The present study aimed to evaluate the impact of the Single Minute Exchange of Die (SMED) method in reducing setup time in a bottling line of a bioinputs industry. To achieve this objective, the SMED methodology was adopted to reduce setup times, which consisted of transforming internal activities into external ones when possible and reducing the time of internal activities that could not be converted. As a result, a reduction of approximately 41% in internal setup times of the bottling line was achieved, and a reduction of approximately 13% in total setup time. These changes made it possible to obtain an increase in line availability, productivity gains and production flexibility.
Downloads
References
BITTENCOURT, V. L.; ALVES, A. C.; LEÃO, C. P. Industry 4.0 triggered by Lean Thinking: insights from a systematic literature review. International Journal of Production Research, v. 59, n. 5, p. 1496-1510, 2021.
CASTAÑEDA, C. A. C. Metodología SMED para aumentar el nivel de servicio en una empresa envasadora de bidones de agua de mesa. 2020. Trabalho de conclusão (Graduação em Engenharia) – Facultad de Ingeniería, Universidad Católica Santo Toribio de Mogrovejo, Chiclayo, Perú.
GIL, A. C. Como elaborar projetos de pesquisa. 7. ed. São Paulo: Atlas, 2022.
GUZEL, D.; ASIABI, A. S. Improvement setup time by using SMED and 5S (an application in SME). International Journal of Scientific and Technology Research, v. 9, n. 1, p. 3727-3732, 2020.
HABIB, M. A.; RIZVAN, R.; AHMED, S. Implementing lean manufacturing for improvement of operational performance in a labeling and packaging plant: a case study in Bangladesh. Results in Engineering, v. 17, p. 100818, 2023.
HU, Q.; MASON, R.; WILLIAMS, S. Lean implementation within SMEs: a literature review. Journal of Manufacturing Technology Management, v. 26, n. 7, p. 980-1012, 2015.
JUNIOR, R. G. P.; INÁCIO, R. H.; HASSUI, A. A novel framework for single-minute exchange of die (SMED) assisted by lean tools. The International Journal of Advanced Manufacturing Technology, v. 119, n. 9, p. 6469-6487, 2022.
LAKATOS, E. M.; MARCONI, M. A. Fundamentos de metodologia científica. 5. ed. São Paulo: Atlas, 2003.
ŁYSZKOWSKA, E. Application of the lean management methodology in Polish companies. International Journal of New Economics and Social Sciences, v. 16, n. 2, p. 83-92, 2022.
MAIA, P. R.; SOUZA, A. R.; MONTEIRO, E. Aplicação da ferramenta SMED na indústria automotiva e seus benefícios. In: Qualidade e produtividade nos processos organizacionais: cenários e análises, p. 145, 2013.
OLIVEIRA, C.; LIMA, T. M. Setup time reduction of an automotive parts assembly line using lean tools and quality tools. Eng, v. 4, n. 3, p. 2352-2362, 2023.
RIBEIRO, M. A. S. Analysis of the implementation of the single minute exchange of die methodology in an agroindustry through action research. Machines, v. 10, n. 5, p. 287, 2022.
ROSIN, F.; FORGET, P.; LAMOURI, S.; PELLERIN, R. Impacts of Industry 4.0 technologies on Lean principles. International Journal of Production Research, v. 58, n. 6, p. 1644-1661, 2020.
SANTOS, R. F. Redução de tempo de setup durante a troca de produto utilizando a ferramenta SMED em uma indústria alimentícia. In: XXXVI Encontro Nacional de Engenharia de Produção, 2015.
ŞAHIN, R.; KOLOĞLU, A. A case study on reducing setup time using SMED on a turning line. Gazi University Journal of Science, v. 35, n. 1, p. 60-71, 2022.
SHINGO, S. Sistema de troca rápida de ferramenta: uma revolução nos sistemas produtivos. Porto Alegre: Bookman, 2000.
SILVA, A.; SÁ, J.; SANTOS, G.; SILVA, F.; FERREIRA, L.; TEIXEIRA, M. A comparison of the application of the SMED methodology in two different cutting lines. Quality Innovation Prosperity, v. 25, n. 1, p. 124-149, 2021.
SUGAI, M.; MCINTOSH, R. I.; NOVASKI, O. Metodologia de Shigeo Shingo (SMED): análise crítica e estudo de caso. Gestão & Produção, São Carlos, v. 14, n. 2, p. 323-335, maio-ago., 2007.
YAZICI, K.; GÖKLER, S. H.; BORAN, S. An integrated SMED-fuzzy FMEA model for reducing setup time. Journal of Intelligent Manufacturing, v. 32, n. 6, p. 1547-1561, 2021.
