Correlation between natural and artificial aging in particleboards
Palavras-chave:
Natural and artificial aging. Mathematic models. Particleboards. Weathering.Resumo
The main objective of this work was stabilizing correlation between natural aging with artificial aging in medium density particleboards produced with polyurethane resin of castor oil and Pinus sp. It was done using climatological parameters at São Carlos city, Brazil and a calculation methodology. And it was calculated that 20 cycles would be proportional the same degradation of two months of exposition of natural aging. There was reduction in the mechanical properties over time for weathering. The relation between physical and mechanical properties with the effects provide by number of months (M) in the natural aging with number of cycles (Nc) in the artificial aging was obtained with cubical polynomial regression models. In general, for physical properties 20 Nc are around at 7 and 8 months, and for mechanical properties are around at 11 and 12 months, with exception internal bonding with 8 months. The expectative with the calculation was 20 Nc is the same two months of outdoor exposition. The equations that best represent relation between Nc and M were thickness swelling at 2h and water absorption at 2 h and 24 h, with R² larger 93%.Downloads
Não há dados estatísticos.
Downloads
Publicado
2022-03-17
Edição
Seção
Artigos
Licença
Copyright (c) 2022 Ambiente Construído

Este trabalho está licenciado sob uma licença Creative Commons Attribution 4.0 International License.
Direito autoral (Copyright)
A Revista se reserva o direito de efetuar, nos originais, alterações de ordem normativa, ortográfica e gramatical, com vistas a manter o padrão culto da língua, respeitando porém, o estilo dos autores. As provas finais serão enviadas aos autores. Os trabalhos publicados passam a ser propriedade da revista Ambiente Construído. As opiniões emitidas pelos autores dos artigos são de sua exclusiva responsabilidade.